4 Reasons Why Admiral Dryer Is Not Heating

Admiral produces plenty of efficient dryer models, both in gas and electric form. If you’re experiencing an Admiral dryer that isn’t heating up, then don’t worry. This article will help you troubleshoot the issue.

Generally, Admiral dryers will not heat up if the control board or high-limit thermostat has failed. Gas dryers will face the same problem if the gas valve solenoid or igniter has stopped working correctly. On the other hand, electric dryers will not generate heat if the heating element is damaged or if the thermal fuse has blown.

Let’s look at the possible reasons behind your Admiral dryer not heating up and what you can do about them.

Here are the top reasons your gas or electric Admiral dryer isn’t generating any heat.

The control board in an Admiral dryer is responsible for coordinating all of its functions. The board has plenty of electrical and electronic components that send power to all of the different dryer parts as and when needed.

A control board in good working order will ensure that the drying cycle starts and finishes without a problem, producing a fresh and dry load of clothes inside.

How it fails:

Control boards can fail for several reasons. For instance, a power surge during a thunderstorm could cause electrical damage to the board. Besides that, water or excessive heat that might seep around the control board could also cause it to malfunction.

Suppose your Admiral dryer has been in use for many years. If that’s the case, then it’s likely that the control board has suffered from wear and tear and stopped working as it should.

Any of these reasons could cause the heating-related components not to receive power, which is why your dryer doesn’t heat up.

How to fix:

To get your Admiral dryer working again, you’ll need to replace the control board entirely.

• First, refer to the user manual to locate and identify the board, so you can remove it from its mounting and remove its electrical connectors.
• Then, put in the new control board and replace the electrical connectors the same way as before.

All Admiral dryers have a high-limit thermostat inside them. This thermostat senses the temperature inside the dryer to ensure that the appliance doesn’t overheat.

If the thermostat senses that your Admiral dryer is overheating, it will force the dryer to stop producing heat until the temperature returns to a safe level. In doing so, the high-limit thermostat prevents the dryer from damaging itself and reduces the overall fire risk posed by the dryer.

How it fails:

A failed high-limit thermostat could be the reason your Admiral dryer isn’t heating up at all. That will happen if the thermostat mistakenly senses that the temperature is too high and prevents the dryer from heating up at all.

Related: 5 Reasons Why Fisher Paykel Dryer is Not Heating

How to fix:

A failed high-limit thermostat must be replaced. You can access it from the rear of the dryer by removing the back panel. To be sure, you can refer to the user manual or technical sheet to identify and locate the high-limit thermostat.

• Once you’ve found it, all you have to do is remove the mounting screws and disconnect the electrical connectors to the thermostat.
• Then, mount the new thermostat and reconnect the wires the same way as before.

Now, let’s look at some reasons why an Admiral gas dryer will not heat up.

Inside your Admiral gas dryer is two or more gas valve solenoids. These are sometimes referred to as gas valve coils, and they are designed to control the flow of gas into the appliance.

When these valve solenoids allow gas to flow into the burner, the air can be heated up and then blown into the drum to dry the clothes inside.

How it fails:

When one or more of these solenoids fails, they do not allow any gas to flow into the Admiral dryer’s burner. As a result, the appliance will not generate any heat, even if everything else is working correctly.

Related: Why Gas Dryer Not Heating Up? Issues and Solutions

How to fix:

Fixing this issue will require a replacement of the gas valve solenoids. This process will begin with removing the front panel of the dryer. Then, depending on the design of your dryer, you might have to remove the drum to gain access to the gas valve solenoids, which are at the bottom of the machine.

• Once there, you’ll need a screwdriver to unscrew the bracket holding the solenoids in place.
• Then, you can unplug the solenoids and remove them from their shafts.
• Put the new solenoids in the same way, then replace the bracket and electrical connectors.

Gas dryers also rely on an igniter to generate heat. But, as the name suggests, this component has a very specific purpose: it ignites the gas so that the dryer can heat the air.

Admiral produces plenty of efficient dryer models, both in gas and electric form. If you’re experiencing an Admiral dryer that isn’t heating up, then don’t worry. This article will help you troubleshoot the issue.

Generally, Admiral dryers will not heat up if the control board or high-limit thermostat has failed. Gas dryers will face the same problem if the gas valve solenoid or igniter has stopped working correctly. On the other hand, electric dryers will not generate heat if the heating element is damaged or if the thermal fuse has blown.

Let’s look at the possible reasons behind your Admiral dryer not heating up and what you can do about them.

Here are the top reasons your gas or electric Admiral dryer isn’t generating any heat.

The control board in an Admiral dryer is responsible for coordinating all of its functions. The board has plenty of electrical and electronic components that send power to all of the different dryer parts as and when needed.

A control board in good working order will ensure that the drying cycle starts and finishes without a problem, producing a fresh and dry load of clothes inside.

How it fails:

Control boards can fail for several reasons. For instance, a power surge during a thunderstorm could cause electrical damage to the board. Besides that, water or excessive heat that might seep around the control board could also cause it to malfunction.

Suppose your Admiral dryer has been in use for many years. If that’s the case, then it’s likely that the control board has suffered from wear and tear and stopped working as it should.

Any of these reasons could cause the heating-related components not to receive power, which is why your dryer doesn’t heat up.

How to fix:

To get your Admiral dryer working again, you’ll need to replace the control board entirely.

• First, refer to the user manual to locate and identify the board, so you can remove it from its mounting and remove its electrical connectors.
• Then, put in the new control board and replace the electrical connectors the same way as before.

All Admiral dryers have a high-limit thermostat inside them. This thermostat senses the temperature inside the dryer to ensure that the appliance doesn’t overheat.

If the thermostat senses that your Admiral dryer is overheating, it will force the dryer to stop producing heat until the temperature returns to a safe level. In doing so, the high-limit thermostat prevents the dryer from damaging itself and reduces the overall fire risk posed by the dryer.

How it fails:

A failed high-limit thermostat could be the reason your Admiral dryer isn’t heating up at all. That will happen if the thermostat mistakenly senses that the temperature is too high and prevents the dryer from heating up at all.

Related: 5 Reasons Why Fisher Paykel Dryer is Not Heating

How to fix:

A failed high-limit thermostat must be replaced. You can access it from the rear of the dryer by removing the back panel. To be sure, you can refer to the user manual or technical sheet to identify and locate the high-limit thermostat.

• Once you’ve found it, all you have to do is remove the mounting screws and disconnect the electrical connectors to the thermostat.
• Then, mount the new thermostat and reconnect the wires the same way as before.

Now, let’s look at some reasons why an Admiral gas dryer will not heat up.

Inside your Admiral gas dryer is two or more gas valve solenoids. These are sometimes referred to as gas valve coils, and they are designed to control the flow of gas into the appliance.

When these valve solenoids allow gas to flow into the burner, the air can be heated up and then blown into the drum to dry the clothes inside.

How it fails:

When one or more of these solenoids fails, they do not allow any gas to flow into the Admiral dryer’s burner. As a result, the appliance will not generate any heat, even if everything else is working correctly.

Related: Why Gas Dryer Not Heating Up? Issues and Solutions

How to fix:

Fixing this issue will require a replacement of the gas valve solenoids. This process will begin with removing the front panel of the dryer. Then, depending on the design of your dryer, you might have to remove the drum to gain access to the gas valve solenoids, which are at the bottom of the machine.

• Once there, you’ll need a screwdriver to unscrew the bracket holding the solenoids in place.
• Then, you can unplug the solenoids and remove them from their shafts.
• Put the new solenoids in the same way, then replace the bracket and electrical connectors.

Gas dryers also rely on an igniter to generate heat. But, as the name suggests, this component has a very specific purpose: it ignites the gas so that the dryer can heat the air.