Bosch Refrigerator Filter Reset

Bosch refrigerators rely on water filters to supply clean water to their water dispenser and ice maker. However, the water filter indicator will turn on every 6 months, reminding you to replace the filter with a new one. So, how do you reset the water filter?

You can reset the Bosch Refrigerator water filter indicator by pressing and holding the light/filter button for 3 seconds. Still, the indicator was on to remind you to change the water filter. So, you must remove the existing filter and then install a compatible replacement. Once you perform those two tasks, the indicator will not turn on for another 6 months.

Resetting the water filter on your Bosch refrigerator is a very straightforward process. Keep reading to discover what you’ll need to do.

The water filter indicator on your Bosch refrigerator is there to remind you to change the fridge’s water filter.

The water filter is crucial for your appliance because it removes debris and other particles from the incoming water supply. From there, the filtered water will supply the water dispenser and ice maker on your Bosch refrigerator.

The water filter indicator will flash until you’ve replaced the current filter with a new one and reset the indicator.

Once you perform those 2 tasks, the water filter indicator will turn off until it’s time to repeat the process all over again.

Read: Bosch Refrigerator Alarm Problems

The water filter indicator on a Bosch refrigerator will come on every 6 months.

The indicator works on a timer. So, when you change the filter and clear the indicator, that will reset the timer. You can expect the indicator to turn on again 6 months after that.

Read: Bosch Refrigerator Is Not Freezing

You’ll know to change the water filter on your Bosch refrigerator when the filter indicator lights up every 6 months. 

However, that’s not the only sign you should pay attention to.

Remember: the water filter indicator on your Bosch fridge relies on a timer. Unfortunately, that means the appliance doesn’t actually know if the water filter is dirty and needs a replacement.

So, if you use the water dispenser more than the average household, or if your water supply is usually quite dirty, you’ll need to replace the filter more frequently.

Besides the water filter indicator, here are some other ways to know when you should replace the filter in your Bosch refrigerator:

• Slow Water Flow: When water flows slower than usual out of the water dispenser or into the ice maker, that’s a clear sign you should change the water filter. The reduced flow is happening because the filter is clogged with particles and is restricting smooth water flow.
• Water Has A Strange Taste: The drinking water that you get from your Bosch refrigerator shouldn’t taste too different from what you get anywhere else in your kitchen. So, if it’s been a few months since your last filter change and the water is tasting a little off, that means it’s time to get another one.
• Low Quality And Quantity Of Ice: Lastly, if you notice that your ice maker is producing ice less frequently and the cubes look or taste strange, that’s another clear sign. Remember: the ice maker and water dispenser receive water supply through the same filter. So, if the filter has gone bad, that will affect both parts.

Read: Why Bosch Refrigerator Is Not Turning ON?

When the water light indicator appears on your Bosch refrigerator, you can reset and clear it. First, however, you must remember that the light comes on for a reason, reminding you that the filter is likely dirty and requires a replacement.

So, before you reset the filter indicator, you must first replace the water filter as soon as possible.

Your Bosch refrigerator model will have its water filter either inside the fridge compartment or somewhere towards the bottom of the appliance. The type of water filter can also differ between Bosch refrigerator models, so yours will either be:

• A push-in filter, or
• A twist-top filter

Suppose you’re ever unsure about the type of water filter in your Bosch appliance or where it’s located. In that case, your best option is to refer to the user manual. The manual will undoubtedly have the information to find and identify the filter.

Now, once you have all the information you need, there’s one more thing you have to do: remove the old filter and install a new one.

Here’s how you can do that:

1. Firstly, shut off the water supply to your refrigerator. Doing that will prevent water from spraying out when you remove the filter.
2. Next, locate the water filter housing and open the cover if it has one.
3. Then, twist the water filter counter-clockwise to unlock it. That will free the filter and allow you to pull it out gently.
4. After that, put the new water filter in and turn it clockwise to lock it in place.
5. Lastly, close the water filter housing cover if there is one.

With a new water filter in place, you must take a few other steps before you can use the water dispenser or ice maker.

Firstly, turn on the water supply to the fridge. Then, you must flush the new filter with water to clean it out and check for any potential leaks. 

The most straightforward way to do this is by dispensing water for at least 3 minutes straight. You’ll be using approximately 2.25 gallons of water for that duration to flush the water filter and make it ready for use.

Once you’ve confirmed that no leaks and the water are coming from the dispenser tastes fine, then you can reset the water filter indicator on your Bosch refrigerator.

Here’s how you can do that:

• First, press and hold the light/filter button on the control panel for 3 seconds.
• When done correctly, the water filter indicator will turn off and only turn back on 6 months later to remind you about the following water filter change.

Bosch refrigerators rely on water filters to supply clean water to their water dispenser and ice maker. However, the water filter indicator will turn on every 6 months, reminding you to replace the filter with a new one. So, how do you reset the water filter?

You can reset the Bosch Refrigerator water filter indicator by pressing and holding the light/filter button for 3 seconds. Still, the indicator was on to remind you to change the water filter. So, you must remove the existing filter and then install a compatible replacement. Once you perform those two tasks, the indicator will not turn on for another 6 months.

Resetting the water filter on your Bosch refrigerator is a very straightforward process. Keep reading to discover what you’ll need to do.

The water filter indicator on your Bosch refrigerator is there to remind you to change the fridge’s water filter.

The water filter is crucial for your appliance because it removes debris and other particles from the incoming water supply. From there, the filtered water will supply the water dispenser and ice maker on your Bosch refrigerator.

The water filter indicator will flash until you’ve replaced the current filter with a new one and reset the indicator.

Once you perform those 2 tasks, the water filter indicator will turn off until it’s time to repeat the process all over again.

Read: Bosch Refrigerator Alarm Problems

The water filter indicator on a Bosch refrigerator will come on every 6 months.

The indicator works on a timer. So, when you change the filter and clear the indicator, that will reset the timer. You can expect the indicator to turn on again 6 months after that.

Read: Bosch Refrigerator Is Not Freezing

You’ll know to change the water filter on your Bosch refrigerator when the filter indicator lights up every 6 months. 

However, that’s not the only sign you should pay attention to.

Remember: the water filter indicator on your Bosch fridge relies on a timer. Unfortunately, that means the appliance doesn’t actually know if the water filter is dirty and needs a replacement.

So, if you use the water dispenser more than the average household, or if your water supply is usually quite dirty, you’ll need to replace the filter more frequently.

Besides the water filter indicator, here are some other ways to know when you should replace the filter in your Bosch refrigerator:

• Slow Water Flow: When water flows slower than usual out of the water dispenser or into the ice maker, that’s a clear sign you should change the water filter. The reduced flow is happening because the filter is clogged with particles and is restricting smooth water flow.
• Water Has A Strange Taste: The drinking water that you get from your Bosch refrigerator shouldn’t taste too different from what you get anywhere else in your kitchen. So, if it’s been a few months since your last filter change and the water is tasting a little off, that means it’s time to get another one.
• Low Quality And Quantity Of Ice: Lastly, if you notice that your ice maker is producing ice less frequently and the cubes look or taste strange, that’s another clear sign. Remember: the ice maker and water dispenser receive water supply through the same filter. So, if the filter has gone bad, that will affect both parts.

Read: Why Bosch Refrigerator Is Not Turning ON?

When the water light indicator appears on your Bosch refrigerator, you can reset and clear it. First, however, you must remember that the light comes on for a reason, reminding you that the filter is likely dirty and requires a replacement.

So, before you reset the filter indicator, you must first replace the water filter as soon as possible.

Your Bosch refrigerator model will have its water filter either inside the fridge compartment or somewhere towards the bottom of the appliance. The type of water filter can also differ between Bosch refrigerator models, so yours will either be:

• A push-in filter, or
• A twist-top filter

Suppose you’re ever unsure about the type of water filter in your Bosch appliance or where it’s located. In that case, your best option is to refer to the user manual. The manual will undoubtedly have the information to find and identify the filter.

Now, once you have all the information you need, there’s one more thing you have to do: remove the old filter and install a new one.

Here’s how you can do that:

1. Firstly, shut off the water supply to your refrigerator. Doing that will prevent water from spraying out when you remove the filter.
2. Next, locate the water filter housing and open the cover if it has one.
3. Then, twist the water filter counter-clockwise to unlock it. That will free the filter and allow you to pull it out gently.
4. After that, put the new water filter in and turn it clockwise to lock it in place.
5. Lastly, close the water filter housing cover if there is one.

With a new water filter in place, you must take a few other steps before you can use the water dispenser or ice maker.

Firstly, turn on the water supply to the fridge. Then, you must flush the new filter with water to clean it out and check for any potential leaks. 

The most straightforward way to do this is by dispensing water for at least 3 minutes straight. You’ll be using approximately 2.25 gallons of water for that duration to flush the water filter and make it ready for use.

Once you’ve confirmed that no leaks and the water are coming from the dispenser tastes fine, then you can reset the water filter indicator on your Bosch refrigerator.

Here’s how you can do that:

• First, press and hold the light/filter button on the control panel for 3 seconds.
• When done correctly, the water filter indicator will turn off and only turn back on 6 months later to remind you about the following water filter change.