Frigidaire Dehumidifier F0 Code – Troubleshooting Guide

Dehumidifiers can help regulate the air so that everyone breathes comfortably. Frigidaire, known for its refrigeration appliances, is a name brand. so it may be troublesome when the f0 error comes up. 

The Frigidaire dehumidifier f0 code could mean several things. The basic meaning is the machine is failing to operate. The code doesn’t tell you why it isn’t operating. However, the problem probably lies in either the voltage or the temperature surrounding the machine. It could also be a a lack of refrigerate, a sensor, failed humidistat or some other faulty part.

Read further to find out more about how to fix this issue. 

Dehumidifiers use a refrigeration system to cool air drawn from the surrounding area and over a coil. This system removes the excess moisture from the area and that makes you more comfortable. 

People tend to feel uncomfortable and find it harder to breathe in humid conditions. The relative humidity should be between 30 and 50 percent in a room that is 68 degrees. When it’s higher than that, you start to feel sticky. A dehumidifier replaces that humid area with cooler, dryer air. 

Read: 5 Reasons Causing Dehumidifier Not Working Properly

A dehumidifier is a simple machine, no matter which brand you own. Its main parts are a fan compressor, a reheater, compressor cooling coils, and a reservoir. 

The fan compressors work on a refrigerant gas to cool the coils, like an air conditioner. Most of the time, this refrigerant gas is freon. The reheater collects the heat produced in the cooling process. 

The coils pull humidity from the air. Moisture is collected on the coils. The reservoir collects water created as it’s drawn from the air as it drips from the coils. The dehumidifier then pushes the air back into the room. 

There are other parts like a thermistor, a humidistat, and a control board that help message when to operate, how to operate, and function. If any of these parts fail, you could get this error code.

Understanding that there are only limited basic parts involved with a dehumidifier, the problem can only be a couple of things. The first thing that could be causing the f0 error is the voltage. 

Dehumidifiers require a certain amount of power to work properly. The outlet where you are using the machine should be a 115V-10% outlet. You may want to check your outlet to make sure it has enough power running through it. 

One of the big problems with humidifiers is people don’t always plug them directly into an outlet. They are trying to adjust them for someone with health issues like a child or spouse, so many times people use extension cords or power bars to provide current to the dehumidifier. 

This may be the source of your problem. The problem may not be with the outlet at all. It may be how you are trying to power the machine. 

Dehumidifiers only work in certain conditions and one of those is temperature. The room temperature should be between 41 degrees Fahrenheit and 90 degrees Fahrenheit. A dehumidifier won’t work properly when it’s near freezing in a room because the refrigeration is affected. 

It also won’t work when the temperatures are above 90 degrees. While a dehumidifier will make the room slightly cooler, it isn’t an air conditioner and will struggle when a room is too warm for it to properly cool down air to collect moisture. 

Unfortunately, there isn’t a lot you can do about this error code because it takes a licensed service technician to fix parts like the humidistat, compressor, or thermistor. You can reset the unit to see if that clears the code. 

Resetting your Frigidaire is easy. You just unplug it from the outlet, wait five minutes, and plug it back in. This will reset the components and should erase the error code. Reset the controls and press start to see if the dehumidifier runs normally or if the error persists. 

You can check some parts like the sensor to do a diagnostics yourself. If the error pops up on the display again, contact an Authorized Frigidaire Service Center. You can start by calling the support center number that should be listed in your owner’s manual. 

You will also want to pull your warranty information in case the repair is covered by the warranty. The repair may be completely covered if your dehumidifier is new enough.

You can use a multimeter to test parts like the humidistat for continuity. The humidistat would be a common problem with an f0 error reading. The dehumidifier will fail to run if the moisture level in the air is so high that it causes the contacts in the humidistat to close. 

The machine will not run if this happens. You will need to replace the humidistat if it doesn’t have continuity.

Yes, you can add coolant or refrigerate to recharge a humidifier. One of the problems the f0 code may be indicating is the machine is low on refrigerate. This is like adding the product to a refrigerator or air conditioning unit.

The only problem is that refrigerates like freon are highly regulated so they are hard to get. They are also expensive. You will need an Authorized Frigidaire Service Center to do the recharge. 

Dehumidifiers can help regulate the air so that everyone breathes comfortably. Frigidaire, known for its refrigeration appliances, is a name brand. so it may be troublesome when the f0 error comes up. 

The Frigidaire dehumidifier f0 code could mean several things. The basic meaning is the machine is failing to operate. The code doesn’t tell you why it isn’t operating. However, the problem probably lies in either the voltage or the temperature surrounding the machine. It could also be a a lack of refrigerate, a sensor, failed humidistat or some other faulty part.

Read further to find out more about how to fix this issue. 

Dehumidifiers use a refrigeration system to cool air drawn from the surrounding area and over a coil. This system removes the excess moisture from the area and that makes you more comfortable. 

People tend to feel uncomfortable and find it harder to breathe in humid conditions. The relative humidity should be between 30 and 50 percent in a room that is 68 degrees. When it’s higher than that, you start to feel sticky. A dehumidifier replaces that humid area with cooler, dryer air. 

Read: 5 Reasons Causing Dehumidifier Not Working Properly

A dehumidifier is a simple machine, no matter which brand you own. Its main parts are a fan compressor, a reheater, compressor cooling coils, and a reservoir. 

The fan compressors work on a refrigerant gas to cool the coils, like an air conditioner. Most of the time, this refrigerant gas is freon. The reheater collects the heat produced in the cooling process. 

The coils pull humidity from the air. Moisture is collected on the coils. The reservoir collects water created as it’s drawn from the air as it drips from the coils. The dehumidifier then pushes the air back into the room. 

There are other parts like a thermistor, a humidistat, and a control board that help message when to operate, how to operate, and function. If any of these parts fail, you could get this error code.

Understanding that there are only limited basic parts involved with a dehumidifier, the problem can only be a couple of things. The first thing that could be causing the f0 error is the voltage. 

Dehumidifiers require a certain amount of power to work properly. The outlet where you are using the machine should be a 115V-10% outlet. You may want to check your outlet to make sure it has enough power running through it. 

One of the big problems with humidifiers is people don’t always plug them directly into an outlet. They are trying to adjust them for someone with health issues like a child or spouse, so many times people use extension cords or power bars to provide current to the dehumidifier. 

This may be the source of your problem. The problem may not be with the outlet at all. It may be how you are trying to power the machine. 

Dehumidifiers only work in certain conditions and one of those is temperature. The room temperature should be between 41 degrees Fahrenheit and 90 degrees Fahrenheit. A dehumidifier won’t work properly when it’s near freezing in a room because the refrigeration is affected. 

It also won’t work when the temperatures are above 90 degrees. While a dehumidifier will make the room slightly cooler, it isn’t an air conditioner and will struggle when a room is too warm for it to properly cool down air to collect moisture. 

Unfortunately, there isn’t a lot you can do about this error code because it takes a licensed service technician to fix parts like the humidistat, compressor, or thermistor. You can reset the unit to see if that clears the code. 

Resetting your Frigidaire is easy. You just unplug it from the outlet, wait five minutes, and plug it back in. This will reset the components and should erase the error code. Reset the controls and press start to see if the dehumidifier runs normally or if the error persists. 

You can check some parts like the sensor to do a diagnostics yourself. If the error pops up on the display again, contact an Authorized Frigidaire Service Center. You can start by calling the support center number that should be listed in your owner’s manual. 

You will also want to pull your warranty information in case the repair is covered by the warranty. The repair may be completely covered if your dehumidifier is new enough.

You can use a multimeter to test parts like the humidistat for continuity. The humidistat would be a common problem with an f0 error reading. The dehumidifier will fail to run if the moisture level in the air is so high that it causes the contacts in the humidistat to close. 

The machine will not run if this happens. You will need to replace the humidistat if it doesn’t have continuity.

Yes, you can add coolant or refrigerate to recharge a humidifier. One of the problems the f0 code may be indicating is the machine is low on refrigerate. This is like adding the product to a refrigerator or air conditioning unit.

The only problem is that refrigerates like freon are highly regulated so they are hard to get. They are also expensive. You will need an Authorized Frigidaire Service Center to do the recharge.