Frigidaire Freezer Beeping Alarm Codes: How To Troubleshoot?

If you have a Frigidaire freezer, you may be familiar with the beeping alarm codes it sometimes displays. These codes can be confusing and frustrating. However, there are several simple steps you can take to troubleshoot the problem and get your freezer back up and running in no time.

Frigidaire freezer beeping codes can be due to a power or temperature issue, the door being open for too long, or the flapper being stuck. Pressing Reset Alarm and disconnecting your device from power for a few minutes can resolve the issue.

In this article, I will discuss the possible causes of the various alarm codes displayed by your Frigidaire freezer and give step-by-step instructions for troubleshooting each one. Let’s get started!

One of the most common reasons your Frigidaire freezer may start beeping alarm codes is a power issue. For example, if there is a power shortage, your freezer will display a PF error code and start beeping. This alarm code informs you that a power failure has occurred.

However, even after the power gets back and everything is okay, the device may continue beeping until you acknowledge the alarm.

How To Troubleshoot the PF Error Code?

To troubleshoot the PF error code on your Frigidaire freezer, you will need to do the following:

1. Check that your freezer is plugged in and that all the power connections are secure.
2. If there is a power outage, press Reset Alarm to stop the beeping and wait until the freezer powers back up.
3. If the power outage is too long and your freezer has defrosted, allow it to sit for several hours until any excess water has drained.
4. If the power is restored and the beeping continues, press the Mute or Default Setting button.
5. For some models, you may need to press Options, select the alarm, and then press Set to acknowledge it.

Read: Frigidaire Freezer Upright Problems You Need To Know Before Buying

Another common reason your Frigidaire freezer may start beeping is if the temperature inside your unit becomes too high. This can happen due to several factors, such as a blocked airflow vent or an open door. The temperature alarm may also be triggered if there are too many items in your freezer.

If your unit displays an H, HI, or High Temp alarm code, it means that the internal temperature has risen above normal levels (the temperature is 26 degrees Fahrenheit/ -3.33 degrees Celsius or above). 

Read more on how to fix the Frigidaire H1 error code here.

Read: Frigidaire Freezer Green Light Blinking: How To Troubleshoot?

How To Troubleshoot the H Error Code?

To troubleshoot the H error code on your Frigidaire freezer, you will need to do the following:

1. Ensure your unit is leveled properly and the door seal is tight.
2. Check for any obstructions inside the ventilation vent at the back of your freezer, and remove them if necessary.
3. Ensure your freezer is not too tightly packed with food items and that there is adequate airflow inside the freezer.
4. If you notice any ice buildup on the walls or shelves, remove it to allow proper airflow inside the unit.
5. If you suspect your temperature alarm was triggered by a door that was left open, close it.
6. Press Mute or Default Settings to acknowledge the alarm.

Read: Why Frigidaire Freezer Not Freezing But Fridge Is Cold? How To Troubleshoot?

Another common reason your Frigidaire freezer may start beeping is if the door is left open for five minutes or more. This may be caused by several reasons, including:

• General carelessness
• A faulty door seal
• Items in the freezer blocking the door
• A defective door switch or sensor

If this happens, a Door Ajar alarm code will appear on the display, and an audible alert will sound until it’s acknowledged. 

If you want to learn more, check out my article about fixing a frigidaire freezer that keeps beeping. 

Read: FRIGIDAIRE Refrigerator – Not Cooling But Freezer Fine. How To Troubleshoot It?

How To Troubleshoot the Door Ajar Alarm Code?

To troubleshoot the Door Ajar alarm code on your Frigidaire freezer, do the following:

1. Make sure nothing is in the way of the door completely closing and that it is properly aligned with the seal.
2. If you suspect a defective door switch or sensor triggered the alarm, you may need to contact a technician for assistance.
3. If you notice any problems with the door seal, remove it and clean it thoroughly using warm water and mild detergent.
4. Allow your unit to sit for several hours until you’re certain that all moisture is gone from inside the freezer compartment.
5. If the alarm continues to sound after completing these steps and closing the door, press the Set key to reset the alarm.

Read: What You Need To Know About FRIGIDAIRE Upright Freezer Problems?

If the flapper on your Frigidaire freezer is held open by a jammed ice cube, it may cause an audible alarm to sound. A Flapper error code will appear on your display if this happens. This situation can arise due to poor airflow or an accumulation of ice inside the unit.

How To Troubleshoot a Flapper Error Code?

The flapper alarm resets itself after 2 minutes. You can also troubleshoot it by following the steps below:

1. Remove any ice buildup inside the unit and let it defrost for several hours until all excess water drains off.
2. If the alarm continues after removing the ice buildup, ensure your freezer is level and well-sealed.
3. Check for any obstructions in the ventilation vent at the back of your unit, and ensure there are no items blocking airflow inside the freezer compartment.
4. If the alarm continues after completing these steps and closing the door, press the Set key on your freezer to reset it.
5. If none of these steps work and the alarm continues to sound, it may be necessary to replace the flapper mechanism to resolve the issue.

Watch the video below from Frigidaire for a clear demonstration of these alarm codes:

If you have a Frigidaire freezer, you may be familiar with the beeping alarm codes it sometimes displays. These codes can be confusing and frustrating. However, there are several simple steps you can take to troubleshoot the problem and get your freezer back up and running in no time.

Frigidaire freezer beeping codes can be due to a power or temperature issue, the door being open for too long, or the flapper being stuck. Pressing Reset Alarm and disconnecting your device from power for a few minutes can resolve the issue.

In this article, I will discuss the possible causes of the various alarm codes displayed by your Frigidaire freezer and give step-by-step instructions for troubleshooting each one. Let’s get started!

One of the most common reasons your Frigidaire freezer may start beeping alarm codes is a power issue. For example, if there is a power shortage, your freezer will display a PF error code and start beeping. This alarm code informs you that a power failure has occurred.

However, even after the power gets back and everything is okay, the device may continue beeping until you acknowledge the alarm.

How To Troubleshoot the PF Error Code?

To troubleshoot the PF error code on your Frigidaire freezer, you will need to do the following:

1. Check that your freezer is plugged in and that all the power connections are secure.
2. If there is a power outage, press Reset Alarm to stop the beeping and wait until the freezer powers back up.
3. If the power outage is too long and your freezer has defrosted, allow it to sit for several hours until any excess water has drained.
4. If the power is restored and the beeping continues, press the Mute or Default Setting button.
5. For some models, you may need to press Options, select the alarm, and then press Set to acknowledge it.

Read: Frigidaire Freezer Upright Problems You Need To Know Before Buying

Another common reason your Frigidaire freezer may start beeping is if the temperature inside your unit becomes too high. This can happen due to several factors, such as a blocked airflow vent or an open door. The temperature alarm may also be triggered if there are too many items in your freezer.

If your unit displays an H, HI, or High Temp alarm code, it means that the internal temperature has risen above normal levels (the temperature is 26 degrees Fahrenheit/ -3.33 degrees Celsius or above). 

Read more on how to fix the Frigidaire H1 error code here.

Read: Frigidaire Freezer Green Light Blinking: How To Troubleshoot?

How To Troubleshoot the H Error Code?

To troubleshoot the H error code on your Frigidaire freezer, you will need to do the following:

1. Ensure your unit is leveled properly and the door seal is tight.
2. Check for any obstructions inside the ventilation vent at the back of your freezer, and remove them if necessary.
3. Ensure your freezer is not too tightly packed with food items and that there is adequate airflow inside the freezer.
4. If you notice any ice buildup on the walls or shelves, remove it to allow proper airflow inside the unit.
5. If you suspect your temperature alarm was triggered by a door that was left open, close it.
6. Press Mute or Default Settings to acknowledge the alarm.

Read: Why Frigidaire Freezer Not Freezing But Fridge Is Cold? How To Troubleshoot?

Another common reason your Frigidaire freezer may start beeping is if the door is left open for five minutes or more. This may be caused by several reasons, including:

• General carelessness
• A faulty door seal
• Items in the freezer blocking the door
• A defective door switch or sensor

If this happens, a Door Ajar alarm code will appear on the display, and an audible alert will sound until it’s acknowledged. 

If you want to learn more, check out my article about fixing a frigidaire freezer that keeps beeping. 

Read: FRIGIDAIRE Refrigerator – Not Cooling But Freezer Fine. How To Troubleshoot It?

How To Troubleshoot the Door Ajar Alarm Code?

To troubleshoot the Door Ajar alarm code on your Frigidaire freezer, do the following:

1. Make sure nothing is in the way of the door completely closing and that it is properly aligned with the seal.
2. If you suspect a defective door switch or sensor triggered the alarm, you may need to contact a technician for assistance.
3. If you notice any problems with the door seal, remove it and clean it thoroughly using warm water and mild detergent.
4. Allow your unit to sit for several hours until you’re certain that all moisture is gone from inside the freezer compartment.
5. If the alarm continues to sound after completing these steps and closing the door, press the Set key to reset the alarm.

Read: What You Need To Know About FRIGIDAIRE Upright Freezer Problems?

If the flapper on your Frigidaire freezer is held open by a jammed ice cube, it may cause an audible alarm to sound. A Flapper error code will appear on your display if this happens. This situation can arise due to poor airflow or an accumulation of ice inside the unit.

How To Troubleshoot a Flapper Error Code?

The flapper alarm resets itself after 2 minutes. You can also troubleshoot it by following the steps below:

1. Remove any ice buildup inside the unit and let it defrost for several hours until all excess water drains off.
2. If the alarm continues after removing the ice buildup, ensure your freezer is level and well-sealed.
3. Check for any obstructions in the ventilation vent at the back of your unit, and ensure there are no items blocking airflow inside the freezer compartment.
4. If the alarm continues after completing these steps and closing the door, press the Set key on your freezer to reset it.
5. If none of these steps work and the alarm continues to sound, it may be necessary to replace the flapper mechanism to resolve the issue.

Watch the video below from Frigidaire for a clear demonstration of these alarm codes: