Samsung Dryer Not Heating? Why It Happens & How To Fix?

In this article, we’re going to take a deep dive into some of the most likely reasons why your dryer isn’t heating up. Then, we’ll explore a few frequently asked questions on this topic.

TLDR: if your Samsung dryer fails to generate heat, it is predominantly attributed to a burnt heating element, accounting for 80% of the cases, while the remaining 18% are caused by a blown thermal cut-off fuse, cycling thermostat, or a failed control board heater relay. The remaining 2% may stem from an inadequate power supply, whereby the dryer receives only 110 Volts, instead of the required 240 Volts.

Burnt Heating Element

What it is: For your Samsung dryer to effectively dry your clothes, it must first generate heat. That’s where the heating element comes into play.

The precise design of the heating element can differ based on the model that you have. Still, they all generally work the same way.

When the machine needs heat, it sends power to the heating element. The heating element generates heat, which is then pushed into the dryer by a blower fan.

That hot, moving air removes moisture and dries out anything that you placed in your Samsung dryer.

Why it fails: Whenever a Samsung dryer isn’t heating up, there’s an 80% chance that it’s caused by a heating element that has burned out.

You can confirm whether or not that’s the case by inspecting the heating element on your Samsung dryer, either with a multimeter or visually.

When you use a multimeter to check the heating element’s resistance, the reading should be approximately 10 Ohms. If that’s the case, then that means your heating element is in good working order.

Besides that, you can grab a flashlight and inspect the entire heating element up-close.

Burnt out elements will give off a burnt smell or have burn marks somewhere along the length of the element.

How to fix: To fix this problem, you’ll need to replace the heating element. Doing that is pretty straightforward.

However, reaching the heating element housing is what makes this a time-consuming and labour-intensive repair job.

Always begin any repairs by shutting off the power supply to the dryer to prevent injury and electrocution. 

Then, keep your user manual and technical sheet close by as a quick reference. That will help you locate and identify the heating element on your model, which will be in its housing somewhere along the air vents.

To get there, you may need to remove several parts that include the drum and any other components in the way.

In this article, we’re going to take a deep dive into some of the most likely reasons why your dryer isn’t heating up. Then, we’ll explore a few frequently asked questions on this topic.

TLDR: if your Samsung dryer fails to generate heat, it is predominantly attributed to a burnt heating element, accounting for 80% of the cases, while the remaining 18% are caused by a blown thermal cut-off fuse, cycling thermostat, or a failed control board heater relay. The remaining 2% may stem from an inadequate power supply, whereby the dryer receives only 110 Volts, instead of the required 240 Volts.

Burnt Heating Element

What it is: For your Samsung dryer to effectively dry your clothes, it must first generate heat. That’s where the heating element comes into play.

The precise design of the heating element can differ based on the model that you have. Still, they all generally work the same way.

When the machine needs heat, it sends power to the heating element. The heating element generates heat, which is then pushed into the dryer by a blower fan.

That hot, moving air removes moisture and dries out anything that you placed in your Samsung dryer.

Why it fails: Whenever a Samsung dryer isn’t heating up, there’s an 80% chance that it’s caused by a heating element that has burned out.

You can confirm whether or not that’s the case by inspecting the heating element on your Samsung dryer, either with a multimeter or visually.

When you use a multimeter to check the heating element’s resistance, the reading should be approximately 10 Ohms. If that’s the case, then that means your heating element is in good working order.

Besides that, you can grab a flashlight and inspect the entire heating element up-close.

Burnt out elements will give off a burnt smell or have burn marks somewhere along the length of the element.

How to fix: To fix this problem, you’ll need to replace the heating element. Doing that is pretty straightforward.

However, reaching the heating element housing is what makes this a time-consuming and labour-intensive repair job.

Always begin any repairs by shutting off the power supply to the dryer to prevent injury and electrocution. 

Then, keep your user manual and technical sheet close by as a quick reference. That will help you locate and identify the heating element on your model, which will be in its housing somewhere along the air vents.

To get there, you may need to remove several parts that include the drum and any other components in the way.