Top 5 Most Common Electrolux Dryer Problems

Electrolux dryers are typically good dryers, but they often come with several problems, some of which make them dangerous for your health and safety.

It is important to know how to diagnose the problems and fix them.

Read on to learn about the 5 most common Electrolux problems and how to fix them.

1.     Electrolux Dryer Can Catch Fire Due To Design Flaw

In 2012, a class action lawsuit against Electrolux was proposed due to a fire started by an Electrolux dryer.

Although the plaintiff did not suffer any actual injury, the lawsuit was filed nonetheless since the judge found that the dryer failed to operate normally and required service beyond the norm. As a result, the dryer started a fire.

More so, the State Farm Fire and Casualty Company charged legal action against Electrolux as well.

They sought to recover $12,000,000 paid out to about 200 of its policy holders for fire-related damage, some of which cost more than $300,000.

According to the suit, the Electrolux dryer allows for the buildup of lint in places that are not easily accessed.

More so, there is never a warning about the lint buildup, which causes the owner to not even realize that there is a buildup in the first place.

This then results in the accumulation of lint that causes a fire.

Even if the dryer does not catch on fire, many customers have complained that the dryer overheats and burns clothing.

Unfortunately, there is no easy fix to this problem. This problem is purely related to the design of the Electrolux and does not include replacing parts.

2.     Lint Build Up In The Blower Wheel

Another common problem that faces Electrolux dryers is that lint builds up in the blower wheel.

The reason for this is that lint is able to get past the filter, causing the dryer to shake and become unserviceable. Luckily, there is a way to fix this issue.

Begin by ordering a new filter from Electrolux.

More specifically, you need to order the Filter Assembly, Lint Clamshell 5304511374, which allows air to enter only through the top.

Before ordering any parts make sure they will fit your model here

This filter is used by the current model dryers that do not have this issue.

You will also need to purchase the Grill Assembly, Lint W/ Moisture Sensor 5304515376.

This is a modified lint housing that includes the same sensor types as the original, but the housing is more effective.

You will replace the original just by unscrewing it from the model and screwing the new housing in.

The main trick, however, is that the connector attached to the new sensor housing is not suitable for all Electrolux dryers.

Disconnect the sensor from the old housing and connect it to the new housing instead.

3.     Dryer Makes A Rumbling Noise

Another common issue of Electrolux dryers is that they make a rumbling noise.

Although this noise does not affect the effectiveness of the dryer, the noise is loud, annoying, and impossible to ignore.

This problem is associated with the previous problem, which is lint buildup in the blower house.

To fix this problem, you can change the lint housing and parts by following the steps listed above.

If you do not want to buy new parts, however, there is another alternative.

Begin by taking off the top panel and setting it aside. Then, remove the front panels by removing the screws under the door, below the dryer, and at the top of the dryer.

Then, disconnect the wiring to the panels so you can completely remove the front panel.

Set the front panel aside. Remove the bulkhead as well after disconnecting the wires and screws.

Look at the wheels and see if there is any damage. Most likely, the wheels are not damaged. Instead, there is likely a lot of lint within the wheels.

Remove all the lint. More so, there is probably a lot of lint around the blower wheel. Remove the lint from the blower wheel.

You should consider using a long screwdriver to remove all the lint. Additionally, remove the lint from the housing duct.

Reassemble the dryer once all the lint has been removed.

4.     Heating Element Burnt Out

Electrolux dryers are also prone to the heating element burning out or grounded. When this happens, you will receive an Error Code E64.

Buy Heating Element Here

This error code makes it easy to detect the problem. It is imperative to fix this problem because your dryer will not heat up or dry clothes properly with An E64 Error Code present.

When this reading comes up, disassemble the dryer, and take out the heating element.

You will probably see that the heating element has collapsed against the sides in some way.

The reason for this collapse is overheating. Well-functioning heating elements include wiring that is right in the middle of the tube, not collapsed.

If the element does not look collapsed but the error code keeps popping up, you will need to use a multimeter to perform a continuity test.

There could be an issue within the unit that is impossible to detect with your eyes.

If the reading is between 0 and 50 ohms of resistance, then the heating element is continuous.

If the reading does not change or only changes a little, then it is not continuous.

If the model is collapsed or the multimeter reading shows that the flow is not continuous, you need to replace the heating element.

Luckily, this is easy to do. All you need to do is buy a completely new heating element and install it in the place of the burnt-out one.

Make sure that the dryer is unplugged before replacing any parts.

5.     Drum Rollers Make A Grinding Noise

Finally, the last common problem of Electrolux dryers is that they make a grinding noise.

More often than not, this grinding noise is either caused by lint or a worn-out drum roller.

Luckily, determining which of these issues is the case involves the same steps.

Take off the top panel and set it aside. Then, remove the front panel.

Do this by unscrewing the screws located under the door, below the dryer, and on top of the dryer.

Also, disconnect the panel wiring to completely remove the front panel. Set the front panel to the side. Remove the bulkhead.

You should have access to the wheels now. Look and see if there is any damage to the roller or if they are worn down.

If you see that one or more of the rollers look damaged, then you need to replace all of the rollers.

If you only replace one roller, then the dryer is likely to make the noise again from the non-replaced rollers wearing down.

You want the rollers to be even to prevent the grinding noise.

We hope that is guide has helped you diagnose and fix your Electrolux dryer problem.

Remember to always unplug your dryer before servicing and practice safety precautions whenever necessary.

Additionally, remember to be safe in general. If there is a fire, leave the home and call the fire department immediately.

Electrolux dryers are typically good dryers, but they often come with several problems, some of which make them dangerous for your health and safety.

It is important to know how to diagnose the problems and fix them.

Read on to learn about the 5 most common Electrolux problems and how to fix them.

1.     Electrolux Dryer Can Catch Fire Due To Design Flaw

In 2012, a class action lawsuit against Electrolux was proposed due to a fire started by an Electrolux dryer.

Although the plaintiff did not suffer any actual injury, the lawsuit was filed nonetheless since the judge found that the dryer failed to operate normally and required service beyond the norm. As a result, the dryer started a fire.

More so, the State Farm Fire and Casualty Company charged legal action against Electrolux as well.

They sought to recover $12,000,000 paid out to about 200 of its policy holders for fire-related damage, some of which cost more than $300,000.

According to the suit, the Electrolux dryer allows for the buildup of lint in places that are not easily accessed.

More so, there is never a warning about the lint buildup, which causes the owner to not even realize that there is a buildup in the first place.

This then results in the accumulation of lint that causes a fire.

Even if the dryer does not catch on fire, many customers have complained that the dryer overheats and burns clothing.

Unfortunately, there is no easy fix to this problem. This problem is purely related to the design of the Electrolux and does not include replacing parts.

2.     Lint Build Up In The Blower Wheel

Another common problem that faces Electrolux dryers is that lint builds up in the blower wheel.

The reason for this is that lint is able to get past the filter, causing the dryer to shake and become unserviceable. Luckily, there is a way to fix this issue.

Begin by ordering a new filter from Electrolux.

More specifically, you need to order the Filter Assembly, Lint Clamshell 5304511374, which allows air to enter only through the top.

Before ordering any parts make sure they will fit your model here

This filter is used by the current model dryers that do not have this issue.

You will also need to purchase the Grill Assembly, Lint W/ Moisture Sensor 5304515376.

This is a modified lint housing that includes the same sensor types as the original, but the housing is more effective.

You will replace the original just by unscrewing it from the model and screwing the new housing in.

The main trick, however, is that the connector attached to the new sensor housing is not suitable for all Electrolux dryers.

Disconnect the sensor from the old housing and connect it to the new housing instead.

3.     Dryer Makes A Rumbling Noise

Another common issue of Electrolux dryers is that they make a rumbling noise.

Although this noise does not affect the effectiveness of the dryer, the noise is loud, annoying, and impossible to ignore.

This problem is associated with the previous problem, which is lint buildup in the blower house.

To fix this problem, you can change the lint housing and parts by following the steps listed above.

If you do not want to buy new parts, however, there is another alternative.

Begin by taking off the top panel and setting it aside. Then, remove the front panels by removing the screws under the door, below the dryer, and at the top of the dryer.

Then, disconnect the wiring to the panels so you can completely remove the front panel.

Set the front panel aside. Remove the bulkhead as well after disconnecting the wires and screws.

Look at the wheels and see if there is any damage. Most likely, the wheels are not damaged. Instead, there is likely a lot of lint within the wheels.

Remove all the lint. More so, there is probably a lot of lint around the blower wheel. Remove the lint from the blower wheel.

You should consider using a long screwdriver to remove all the lint. Additionally, remove the lint from the housing duct.

Reassemble the dryer once all the lint has been removed.

4.     Heating Element Burnt Out

Electrolux dryers are also prone to the heating element burning out or grounded. When this happens, you will receive an Error Code E64.

Buy Heating Element Here

This error code makes it easy to detect the problem. It is imperative to fix this problem because your dryer will not heat up or dry clothes properly with An E64 Error Code present.

When this reading comes up, disassemble the dryer, and take out the heating element.

You will probably see that the heating element has collapsed against the sides in some way.

The reason for this collapse is overheating. Well-functioning heating elements include wiring that is right in the middle of the tube, not collapsed.

If the element does not look collapsed but the error code keeps popping up, you will need to use a multimeter to perform a continuity test.

There could be an issue within the unit that is impossible to detect with your eyes.

If the reading is between 0 and 50 ohms of resistance, then the heating element is continuous.

If the reading does not change or only changes a little, then it is not continuous.

If the model is collapsed or the multimeter reading shows that the flow is not continuous, you need to replace the heating element.

Luckily, this is easy to do. All you need to do is buy a completely new heating element and install it in the place of the burnt-out one.

Make sure that the dryer is unplugged before replacing any parts.

5.     Drum Rollers Make A Grinding Noise

Finally, the last common problem of Electrolux dryers is that they make a grinding noise.

More often than not, this grinding noise is either caused by lint or a worn-out drum roller.

Luckily, determining which of these issues is the case involves the same steps.

Take off the top panel and set it aside. Then, remove the front panel.

Do this by unscrewing the screws located under the door, below the dryer, and on top of the dryer.

Also, disconnect the panel wiring to completely remove the front panel. Set the front panel to the side. Remove the bulkhead.

You should have access to the wheels now. Look and see if there is any damage to the roller or if they are worn down.

If you see that one or more of the rollers look damaged, then you need to replace all of the rollers.

If you only replace one roller, then the dryer is likely to make the noise again from the non-replaced rollers wearing down.

You want the rollers to be even to prevent the grinding noise.

We hope that is guide has helped you diagnose and fix your Electrolux dryer problem.

Remember to always unplug your dryer before servicing and practice safety precautions whenever necessary.

Additionally, remember to be safe in general. If there is a fire, leave the home and call the fire department immediately.