Why Amana Dishwasher Not Draining?

An often-overlooked process of an Amana dishwasher is its draining function. The appliance must always be able to drain dirty water, or else your kitchenware will remain soiled.

A little standing water at the bottom of the dishwasher isn’t a problem. But when none of the water drains, the drainage system is clogged, or the drain pump has failed. The same will happen to dishwashers connected to garbage disposals if the drain plug between the two units isn’t removed.

Your Amana dishwasher can’t work if it won’t drain. So, this guide will help you troubleshoot the problem and minimize any downtime with the appliance.

There are several reasons why your Amana dishwasher might not drain water. Don’t worry, though, as troubleshooting those reasons are pretty straightforward.

Here are 4 reasons your Amana dishwasher isn’t draining and what you can do about them: 

Standing Water In Filter Area

About this: It’s easy to think that your Amana dishwasher is not draining when you see standing water in the filter area, even when you’re not using the appliance. However, you should know that this is completely normal and doesn’t mean there’s a problem.

After your dishwasher drains the water inside, a small amount will always be left at the bottom of the compartment.

Its effects:  The standing water you see in the filter area has no negative effects. Quite the opposite, actually, as that water prevents the dishwasher’s seals from drying out completely.

How to fix it: There’s nothing for you to fix when it comes to the standing water in your dishwasher’s filter area. So when you start a new wash cycle, that dishwasher will drain that standing water and replace it with fresh water.

That drain-and-replace cycle will repeat itself each time you use your dishwasher.

Read: Why LG Dishwasher Smells Like Burning Plastic?

Issue With Garbage Disposal 

About this: Believe it or not, your Amana dishwasher’s ability to drain can be affected by your garbage disposal (if you have one connected). That’s because garbage disposal units come with an inlet that you can connect with your dishwasher drain hose.

That way, the water will flow through the garbage disposal when your Amana dishwasher drains.

Of course, that’s only possible if you remember to remove the drain plug (or ‘knockout plug’) that stops water from flowing between both appliances.

Its effects: When the drain plug hasn’t been removed, water will remain trapped inside the dishwasher with nowhere to go.

This problem is typical when people change their garbage disposal unit but forget to remove the knockout plug.

How to fix it: Suppose you forgot to remove the drain plug from your garbage disposal. In that case, you’ll want to remove the unit and knock the plug out.

Once you remove the plug, reassemble the garbage disposal and connect it to your Amana dishwasher’s hose. The appliance will drain normally.

An often-overlooked process of an Amana dishwasher is its draining function. The appliance must always be able to drain dirty water, or else your kitchenware will remain soiled.

A little standing water at the bottom of the dishwasher isn’t a problem. But when none of the water drains, the drainage system is clogged, or the drain pump has failed. The same will happen to dishwashers connected to garbage disposals if the drain plug between the two units isn’t removed.

Your Amana dishwasher can’t work if it won’t drain. So, this guide will help you troubleshoot the problem and minimize any downtime with the appliance.

There are several reasons why your Amana dishwasher might not drain water. Don’t worry, though, as troubleshooting those reasons are pretty straightforward.

Here are 4 reasons your Amana dishwasher isn’t draining and what you can do about them: 

Standing Water In Filter Area

About this: It’s easy to think that your Amana dishwasher is not draining when you see standing water in the filter area, even when you’re not using the appliance. However, you should know that this is completely normal and doesn’t mean there’s a problem.

After your dishwasher drains the water inside, a small amount will always be left at the bottom of the compartment.

Its effects:  The standing water you see in the filter area has no negative effects. Quite the opposite, actually, as that water prevents the dishwasher’s seals from drying out completely.

How to fix it: There’s nothing for you to fix when it comes to the standing water in your dishwasher’s filter area. So when you start a new wash cycle, that dishwasher will drain that standing water and replace it with fresh water.

That drain-and-replace cycle will repeat itself each time you use your dishwasher.

Read: Why LG Dishwasher Smells Like Burning Plastic?

Issue With Garbage Disposal 

About this: Believe it or not, your Amana dishwasher’s ability to drain can be affected by your garbage disposal (if you have one connected). That’s because garbage disposal units come with an inlet that you can connect with your dishwasher drain hose.

That way, the water will flow through the garbage disposal when your Amana dishwasher drains.

Of course, that’s only possible if you remember to remove the drain plug (or ‘knockout plug’) that stops water from flowing between both appliances.

Its effects: When the drain plug hasn’t been removed, water will remain trapped inside the dishwasher with nowhere to go.

This problem is typical when people change their garbage disposal unit but forget to remove the knockout plug.

How to fix it: Suppose you forgot to remove the drain plug from your garbage disposal. In that case, you’ll want to remove the unit and knock the plug out.

Once you remove the plug, reassemble the garbage disposal and connect it to your Amana dishwasher’s hose. The appliance will drain normally.