Why GE Refrigerator Leaks Water On Floor

GE refrigerators can sometimes suffer from a leak, just like any other fridge on the market. However, where the leak comes from will tell you a lot about what’s causing it. If your GE fridge is leaking water onto the floor, you’ll want to read this guide to the end.

When a GE fridge leaks water onto the floor, it’s likely because of a damaged water inlet valve, clogged or frozen defrost drain, or a cracked drain pan. When melting any ice buildups, be sure to use hot water and not heat guns or hair dryers that will damage the fridge’s plastic parts.

This guide will guide you through the necessary troubleshooting steps to resolve this issue.

The solution you need to fix your leaking GE refrigerator will depend on the exact cause. This section will explore three most likely causes: a damaged water inlet valve, a clogged or frozen defrost drain, and a cracked drain pan.

Damaged Water Inlet Valve

What it is: Your GE refrigerator has a water inlet valve that it uses to control all incoming water. You’ll find this valve located at the back of your fridge, connected to your household waterline.

The water inlet valve is a mechanical component that the fridge controls mechanically. When the refrigerator needs water, it signals the valve to open. That water will then flow towards the water dispenser and ice maker.

Once the fridge senses enough water inside, it will signal the water inlet valve to close. That will prevent the refrigerator from overfilling or overflowing with water.

How it fails: When you find water leaking onto the floor around the refrigerator, it’s likely because a part of the water inlet valve is damaged. For example, water will leak through a crack in the valve and flow downwards onto the floor.

That kind of damage likely happens when the fridge is pushed too hard against the wall behind it. When that happens, the valve experiences enough impact to cause a crack.

How to fix it: A damaged and leaking water inlet valve cannot be repaired, so you must replace it with a new one. To do that, first shut off the fridge’s power and water supplies so you can work safely.

The exact location of the valve will depend on your fridge model and design. However, you’re likely to find it concealed behind a panel at the back of the fridge, close to the ground.

Firstly, you must remove that panel to uncover the valve. Then, disconnect all hoses attached to the valve.

Next, unthread the screws that mount the valve to the fridge’s frame. That will free the existing water inlet valve.

Then, mount the new valve onto the fridge frame and reattach the hoses you removed earlier.

GE refrigerators can sometimes suffer from a leak, just like any other fridge on the market. However, where the leak comes from will tell you a lot about what’s causing it. If your GE fridge is leaking water onto the floor, you’ll want to read this guide to the end.

When a GE fridge leaks water onto the floor, it’s likely because of a damaged water inlet valve, clogged or frozen defrost drain, or a cracked drain pan. When melting any ice buildups, be sure to use hot water and not heat guns or hair dryers that will damage the fridge’s plastic parts.

This guide will guide you through the necessary troubleshooting steps to resolve this issue.

The solution you need to fix your leaking GE refrigerator will depend on the exact cause. This section will explore three most likely causes: a damaged water inlet valve, a clogged or frozen defrost drain, and a cracked drain pan.

Damaged Water Inlet Valve

What it is: Your GE refrigerator has a water inlet valve that it uses to control all incoming water. You’ll find this valve located at the back of your fridge, connected to your household waterline.

The water inlet valve is a mechanical component that the fridge controls mechanically. When the refrigerator needs water, it signals the valve to open. That water will then flow towards the water dispenser and ice maker.

Once the fridge senses enough water inside, it will signal the water inlet valve to close. That will prevent the refrigerator from overfilling or overflowing with water.

How it fails: When you find water leaking onto the floor around the refrigerator, it’s likely because a part of the water inlet valve is damaged. For example, water will leak through a crack in the valve and flow downwards onto the floor.

That kind of damage likely happens when the fridge is pushed too hard against the wall behind it. When that happens, the valve experiences enough impact to cause a crack.

How to fix it: A damaged and leaking water inlet valve cannot be repaired, so you must replace it with a new one. To do that, first shut off the fridge’s power and water supplies so you can work safely.

The exact location of the valve will depend on your fridge model and design. However, you’re likely to find it concealed behind a panel at the back of the fridge, close to the ground.

Firstly, you must remove that panel to uncover the valve. Then, disconnect all hoses attached to the valve.

Next, unthread the screws that mount the valve to the fridge’s frame. That will free the existing water inlet valve.

Then, mount the new valve onto the fridge frame and reattach the hoses you removed earlier.