Why is dishwasher not drying dishes?

Are you constantly having to dry dishes that you just pulled out of the dishwasher because they are not completely dry? This can be extremely annoying if it constantly happening and getting in the way of your family time every night.

There are a number of causes for the dishes not to be drying completely after the dishwasher completely stops.

Below you will find a shortlist of the most common causes of a dishwasher that does not completely dry all of the dishes. Along with the list of causes, we included steps to follow to fix the problems yourself and save yourself some time and money on repair costs.

4 Common causes for your dishwasher not drying the dishes

• The vent is stuck closed
• The heating element is not working properly
• Failed thermostat
• Broken Rinse aid dispenser cap

The vent is stuck closed –

In order to get all of the dishes clean inside a dishwasher, there is a whole lot of water being used. This water is extremely hot in order to be sure all of the food particles and residue is completely removed from all of the dishes, cups, glasses, silverware, and other utensils. Along with the hot water is plenty of detergents.

Once all of the cleaning and rinsing is done and the water stops spraying the dishes then begin the drying process. Part of that drying cycle is the heating element which raises the temperature inside the dishwasher to aid in the drying of the dishes.

Unfortunately, the inside of the dishwasher is a fairly closed system that the water inside does not spray out everywhere. Due to the superheating of the water, there tends to be a lot of steam and water vapors trapped inside that would most definitely impede the drying of the dishes.

Fortunately, designers of modern dishwashers have a handy solution to this problem and they are called vents that are opened electrically as part of the drying cycle.

So, if you are experiencing issues with the dishes not getting dry completely, one of the first things you would check is to see if the vents are stuck closed and will open to allow the excess steam and water vapor to escape.

Using a multimeter you can check to see if the switch is functioning properly. If you find that the switch is faulty you can replace the switch either by getting the part from the manufacturer or purchase an aftermarket switch and replace it. You can Get it here

Are you constantly having to dry dishes that you just pulled out of the dishwasher because they are not completely dry? This can be extremely annoying if it constantly happening and getting in the way of your family time every night.

There are a number of causes for the dishes not to be drying completely after the dishwasher completely stops.

Below you will find a shortlist of the most common causes of a dishwasher that does not completely dry all of the dishes. Along with the list of causes, we included steps to follow to fix the problems yourself and save yourself some time and money on repair costs.

4 Common causes for your dishwasher not drying the dishes

• The vent is stuck closed
• The heating element is not working properly
• Failed thermostat
• Broken Rinse aid dispenser cap

The vent is stuck closed –

In order to get all of the dishes clean inside a dishwasher, there is a whole lot of water being used. This water is extremely hot in order to be sure all of the food particles and residue is completely removed from all of the dishes, cups, glasses, silverware, and other utensils. Along with the hot water is plenty of detergents.

Once all of the cleaning and rinsing is done and the water stops spraying the dishes then begin the drying process. Part of that drying cycle is the heating element which raises the temperature inside the dishwasher to aid in the drying of the dishes.

Unfortunately, the inside of the dishwasher is a fairly closed system that the water inside does not spray out everywhere. Due to the superheating of the water, there tends to be a lot of steam and water vapors trapped inside that would most definitely impede the drying of the dishes.

Fortunately, designers of modern dishwashers have a handy solution to this problem and they are called vents that are opened electrically as part of the drying cycle.

So, if you are experiencing issues with the dishes not getting dry completely, one of the first things you would check is to see if the vents are stuck closed and will open to allow the excess steam and water vapor to escape.

Using a multimeter you can check to see if the switch is functioning properly. If you find that the switch is faulty you can replace the switch either by getting the part from the manufacturer or purchase an aftermarket switch and replace it. You can Get it here